Removing Water Rings From Wood Furniture

Water rings on wood furniture can be a frustrating sight. They can make your furniture look old and worn before its time. But don't worry, there are a few simple steps you can take to remove water rings from wood furniture and restore its original beauty.

Step 1: Determine the type of finish on your furniture. This is important because the type of finish will determine which cleaning method you use.

Unfinished wood: Unfinished wood is the easiest type of finish to remove water rings from. Simply dampen a clean cloth with water and wipe away the water ring.
Oil-based finish: Oil-based finishes are a bit more difficult to remove water rings from. You will need to use a mild soap and water solution and a soft cloth to gently wipe away the water ring.
Lacquer finish: Lacquer finishes are the most difficult to remove water rings from. You will need to use a commercial furniture polish and a soft cloth to gently buff away the water ring.

Step 2: Clean the water ring. Once you have determined the type of finish on your furniture, you can clean the water ring.

For unfinished wood: Dampen a clean cloth with water and wipe away the water ring.
For oil-based finish: Mix a mild soap and water solution and dampen a soft cloth with the solution. Wipe away the water ring.
For lacquer finish: Apply a commercial furniture polish to a soft cloth and buff away the water ring.

Step 3: Dry the area. Once you have cleaned the water ring, dry the area with a clean, dry cloth.

Step 4: Repeat steps 2 and 3 if necessary. If the water ring is still visible, repeat steps 2 and 3 until the water ring is removed.

Tips:

Always test any cleaning solution on an inconspicuous area of your furniture first to make sure it does not damage the finish.
Do not use abrasive cleaners on wood furniture, as they can damage the finish.
If the water ring is large or deep, you may need to call a professional furniture restorer to remove it.